Salamander Pumps TapBoost Single Outlet Booster 0.5bar (590JF)
Quiet, cost-effective solution to low water flow at a single outlet. Boosts water flow to a tap, dishwasher, washing machine or toilet, to between 7-11 litres per minute, depending on the incoming flow. Suitable for use in gravity or mains-fed systems in multiple locations around the house, including bathroom and kitchen sinks, bath taps, garden taps, toilet cisterns, dishwashers, washing machines and showers. Easy to install.
- Suitable for Gravity-Fed Systems
- 1/2” BSP Male outlet
- Valves Not Supplied
- Continuous Rating
- Metal & Plastic
- 2 Year Manufacturer's Guarantee (T&Cs Apply)
View all: Salamander Pumps Shower Pumps
You may also like:
Specification | |
---|---|
Advisory Notice | Natural flow rate of 1.2 Ltr/min required to activate pump. Flow rate increase dependent on natural flow into pump. TapBoost cannot overcome restrictions in pipework/outlet. Read installation guide for full installation requirements. |
Bar Pressure | 0.5 bar |
Brand | Salamander Pumps |
Connection Type | 1/2” BSP Male outlet |
Construction Material (Bathrooms) | Metal & Plastic |
Gravity Fed Systems | Suitable for Gravity-Fed Systems |
IP Rating | IPX4 |
Impeller Type | Single |
Manufacturer Guarantee | 2 Year Manufacturer's Guarantee (T&Cs Apply) |
Max. Pump Flow Rate | 11 Ltr/min |
Min Pump Flow Rate | 7 Ltr/min |
Model No | TapBoost |
Noise Level at 1m | 34.2 dBA |
Pack Size | 1 |
Parent Colour | White |
Pieces in Pack/Case | 1 |
Product Height | 34 mm |
Product Length | 145 mm |
Product Type | Single Outlet Booster |
Product Width | 52 mm |
Pump Type | Booster |
Supplier Manufacturer Helpline | 0191 516 2002 |
Total Product Weight | 1.0 kg |
Valve Type | Valves Not Supplied |
Product Contents
Pump with cable (0.95m), power supply unit with cable (1.15m), power supply unit mains cable (1.9m), inlet compression nut (15mm), inlet compression olive (15mm) and spare inlet filter (one is pre-fitted to the pump inlet).