BG Sync EV Wall Charger 2 4G RFID 1 Port 22kW 3-Phase Mode 3 Type 2 Socket Smart EV Charger Grey (343RW)
WiFi, Ethernet, 4G and RFID. Colour-customisable front fascia. CT clamps available seperately. Dynamic charging up to 22kW on 3-phase AC power. Powered by Monta App, Type A RCD (30mA AC + 6mA DC). No earth rod required, integrated open PEN conductor protection.
- Works with - iOS App - Android App
- 400V AC 3-Phase Charging
- Type 2 Socket (Cable Not Supplied)
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- Waterproof & UV-Resistant
- IP55
- Must be Fitted by a Qualified and Registered Installer
- IK10 Impact Resistance
- Hub Not Required
View all: BG Sync EV Electric Vehicle Charging
You may also like:
| Specification | |
|---|---|
| AC/DC Voltage & Charging | 400V AC 3-Phase Charging |
| Brand | BG Sync EV |
| Cable Entry Points | Bottom & Rear |
| Charging Mode | Mode 3 |
| Colour | Grey |
| Communication Protocol | OCPP |
| Compatible with Solar Panels | Not Compatible with Solar Panels |
| Construction Material (Electrical) | Polycarbonate |
| Current Rating | 6-32 A |
| Display Type | Without Display |
| Domestic/Commercial Use | Suitable for Domestic & Commercial Use |
| EV Plug Type | Type 2 |
| EV Product Type | Stations |
| Fitting Requirements | Must be Fitted by a Qualified and Registered Installer |
| Frequency Band (Smart) | 2.4 GHz |
| Hertz (Hz) | 2.4 Hz |
| IK Rating | IK10 |
| IP Rating | IP55 |
| Initial Connection Network | WiFi |
| Internet Connection Required | Cloud Control (Internet Connection Required) |
| Manufacturer Guarantee | 3 Year Manufacturer's Guarantee (T&Cs Apply) |
| Model Name | Wall Charger 2 4G RFID |
| Model No | EVWC2S22GGR-01 |
| Mount Type | Wall-Mounted |
| Network Standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n. |
| Network Standards (Full) | WiFi |
| No. of Bands | Single-Band |
| No. of Phases | 3-Phase |
| No. of Ports | 1 Port |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Plug Type | Type 2 Socket |
| Power Rating (Watts Kw) | 22 kW |
| Power Type | Mains-Powered |
| Product Depth | 117 mm |
| Product Height | 305 mm |
| Product Type | Smart EV Charger |
| Product Width | 201 mm |
| RFID Card Included | RFID Card Supplied |
| Resistant Type | Waterproof & UV-Resistant |
| Smart Hub Requirement | Hub Not Required |
| Standby Power Consumption | 4 W |
| Switched/Unswitched | Unswitched |
| Temperature Range | -25 to +40 °C |
| Total Product Weight | 2.397 kg |
| Wireless Range (Max.) | Dependent on 4G Coverage |
| Wireless Range Restrictions | Electronic interference from appliances or physical obstruction, such as brick walls, metal frames and floors, can reduce the wireless range. A signal weakens every time it encounters an obstruction. |
| Works with Amazon Alexa | Does Not Work with Amazon Alexa |
| Works with Android App | Works with Android App |
| Works with Apple HomeKit | Does Not Work with Apple HomeKit |
| Works with Google Home | Does Not Work with Google Home |
| Works with Home Assistant | Does Not Work with Home Assistant |
| Works with Homey | Does Not Work with Homey |
| Works with Hubitat | Does Not Work with Hubitat |
| Works with Matter | Does Not Work with Matter |
| Works with Myko | Does Not Work with Myko |
| Works with Samsung SmartThings | Does Not Work with Samsung SmartThings |
| Works with iOS App | Works with iOS App |
Product Contents
RFID card, 25mm compression gland, 25mm blind grommet and installation washers.